The minimum purchase order quantity for the product is 1. Our array is well known all across the market for their splendid features such as quality and efficiency. A single pack, temperature indicating paint based upon a modified silicone. A heat resistant finish coat for application over properly primed steelwork. Suitable for areas subject to intermediate service temperature that require a coloured finish.
|Published (Last):||9 February 2019|
|PDF File Size:||5.92 Mb|
|ePub File Size:||7.54 Mb|
|Price:||Free* [*Free Regsitration Required]|
Typically 1. All unused material should be stored in tightly closed containers. Material should be filtered prior to use. It is good working practice to periodically flush out spray equipment during the course of the working day.
Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. The preferred system for use with inorganic zinc silicate is to apply a mist coat followed by a full coat of Intertherm at 1.
Application of two full coats can sometimes result in pinholes in the topcoat. When overcoating weathered zinc silicate primers the surface should be clean, free from contamination, and the presence of zinc corrosion products. This material is air drying and is suitable for application both in the fabrication yard and on-site where stoving facilities are not available. Over-application can lead to blistering at high temperatures.
Some minor color and gloss changes will be visible upon high heat exposure. Note: VOC values quoted are based on maximum possible for the product taking into account variations due to color differences and normal manufacturing tolerances.
Low molecular weight reactive additives, which will form part of the film during normal ambient cure conditions, will also effect VOC values determined using EPA Method In the event welding or flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation. If in doubt regarding the suitability of use of this product, consult International Protective Coatings for further advice.
INTERTHERM 875 PDF
International Intertherm 875